
Proline CH Dura Color Hardener - 5 Gallon Pail
Proline Concrete ToolsProline CH Dura Color Hardener - 5 Gallon Pail
Dry-shake Color Hardeners come as powders that are hand broadcast onto the freshly placed concrete and then worked into the surface with a float or trowel. It is durable enough for high traffic areas. In addition to adding color to concrete, it makes a great base for stamped concrete.
- Formulated with only quality ingredients for a denser, more durable surface
- The denser surface picks up even more detail from the texture mat
- Made with stable, U.V . resistant, alkali-friendly, iron oxide pigments
- Blended in a carefully monitored process for maximum consistency
PROLINE DURA COLOR HARDENER is a colored dry-shake hardener that is broadcast by hand over the top of freshly placed concrete and worked in with a wood float to form a dense, colored concrete "skin" on the slab surface. Dry-shake color hardener is best applied to a concrete slab containing no more than a 4 inch slump and between a 5 and 6 sack per cubic yard cement content. This product is compatible with most admixtures, but avoid those containing calcium chloride. Apply PROLINE DURA COLOR HARDENER shortly after screeding and floating the new concrete just as the bleed water is coming to the slab surface. It should be broadcast by hand as uniformly as possible and then worked in with a wood float. Start with the edges first then work in toward the middle when broadcasting and floating. Most colors will go on with two shakes, or coats, followed by touch up but lighter colors may require three shakes. If the surface is to be textured, then a light troweling is recommended. Over-trowling will discolor the concrete. For a textured "antique" look, a light hardener color should be paired with a darker PROLINE DURA ANTIQUE RELEASE and PROLINE TEXTURE MATS for stamping. It is always recommended that a representative job site sample be done to test the look of the color and texture combinations.
One 60 pound bucket of PROLINE DURA COLOR HARDENER covers about 100 square feet, but lighter colors may require a rate of 100 pounds per 100 square feet.
Curing: Non-staining acrylic, wax curing compound, or sealer is recommended. Do not cure with plastic sheeting, membrane paper, or water misting. Avoid sodium silicone type hardeners. Products not recommended could cause discoloration or mottling of the colored surface. Allow the concrete to cure for 28 days before sealing.
CH625 - EL PASO
CH700 - BLACK
CH650 - BEIGE CREAM
CH644 - BUCKWHEAT
CH643 - PECAN
CH641 - WALNUT
CH640 - RED BRICK
CH638 - TILE RED
CH635 - JAVA
CH632 - SADDLE SOAP
CH631 - MISSION BEIGE
CH630 - PUEBLO
CH629 - TERRA COTTA
CH628 - GEORGIA CLAY
CH601 - CREAM BUFF
CH623 - ARIZONA BUFF
CH622 - ESPRESSO
CH615 - MIDNIGHT GRAY
CH614 - ROCK GRAY
CH613 - SOFT GRAY
CH612 - OCEANSIDE
CH610 - MOCHA
CH609 - SANTA FE
CH606 - NAVAJO
CH605 - MOJAVE
CH603 - SAND CANYON
CH602 - ADOBE BEIGE
Please Note: Prices, promotions, styles and availability may vary by store and online. Inventory is sold and received continuously throughout the day; therefore, the quantity shown may not be available when you get to the store.